Smc-networks Barricade BR14VPN Bedienungsanleitung PDF herunterladen (Seite 53)

8 | IPSec Settings Guide (For Reference/Example Only)

8.1 | Tunnel between two SMCBR14VPN

The easiest way to construct a VPN tunnel between two sites is to use two SMCBR14VPNs,

which are connected to the internet.

The steps to follow to create an IP tunnel between are the following:

• Step 1: Go to the VPN section and select the enable checkbox for [VPN]

• Step 2: Select the number of Tunnels you want to enable

• Step 3: Enter a Tunnel Name, select IKE or MANUAL for the method and click [More]

• Step 4: Local subnet value is the LAN SUBNET

• Step 5: Local netmask value is the LAN SUBNET MASK

• Step 6: Remote subnet value is the LAN SUBNET of the REMOTE NETWORK

• Step 7: Remote netmask value is the LAN SUBNET MASK of the REMOTE NETWORK

• Step 8: Remote gateway value is the WAN IP of the REMOTE NETWORK

• Step 9: Preshare key value is used to determine the network encryption

• Step 10: SAVE SETTINGS and then configure the IKE PROPOSAL and IPSEC

PROPOSAL

8.1.1 | Settings for Router 1

VPN Router

WAN IP Address: ip1.smc.com

LAN IP Address: 192.168.1.1

PC 192.168.1.xxx

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 72 73

Keine Kommentare

Smc-networks Barricade BR14VPN Bedienungsanleitung Seite 53