Smc-networks Barricade Cable/DSL Router Bedienungsanleitung

Cable/DSL Router User Guide The information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibilit

-9- 3. Connecting the Barricade with other hubs: In case you do not need to connect with another hub, skip this step. If you want to connect the Barr

-10- Chapter 3 Network Settings and Software Installation To use the Barricade correctly, you must properly configure the network settings of your c

-11- Request timed out. there has been an error in your installation procedure. Please go through the following checklist to ensure proper installatio

-12- Step 2: Click on the INSTALL button. Wait for the following Welcome dialog to appear, and click on the Next button. Step 3: Select the destina

-13- Step 4: When the following window is displayed, click on the Finish button. Step 5: Select the item to restart the computer and then click the O

-14- Chapter 4 Configuring the Barricade The Barricade provides a Web-based configuration scheme, which is configurable by Netscape Communicator or

-15- 4.2 Status This option provides the function for observing the product’s operating status: A. WAN Port Status. If the WAN port is assigned a d

-16- 4.3 Toolbox This option enables you to change the administrator password. You can also obtain information about Firmware version and WAN's

-17- 4.4 Primary Setup This option enables the product to work properly. The setting items and the web appearance depend on the type of WAN. Choose t

-18- 4.4.1 Static IP Address WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting value provided by your ISP. 4.4

-1- Trademarks: SMC is a registered trademark; and Barricade is a registered trademark of SMC Networks, Inc. Other products and company names are tra

-19- 4.5 DHCP Server The settings of the TCP/IP environment include Host IP, Subnet Mask, Gateway, and DNS configurations. It is not easy to correctl

-20- 4.6 Virtual Server The Barricade’s NAT (Network Address Translation) firewall filters out unrecognized packets to protect your Intranet, so a

-21- 4.7 Special AP Some applications require multiple connections, such as Internet games, video conferencing, Internet telephony and others. Due to

-22- 4.8 Access Control Access Control allows you to assign the access right for each user. First, you must divide users into different groups, as id

-23- 4.9 Miscellaneous Items 1. IP Address of DMZ Host: The DMZ (Demilitarized Zone) Host is a host without the protection of a firewall. It allows

-24- Chapter 5 Print Server The Barricade provides the function of a network print server for MS Windows 95/98/NT/2000 and Unix based platforms. 5.1

-25- You can now configure the print server: 1. Find the corresponding icon of your server printer, for example, the HP LaserJet 6L. Right click on t

-26- 3. Choose the “PRTmate: (All-in-1)” from the list attached under the Print To item. Be sure that the Printer Driver item is configured to the co

-27- Compared to the procedure in the last section, the selection of Details is equivalent to the selection of Ports, and Port Settings is equivalent

-28- Appendix A: Console Mode When you forget the system password or the IP address for the Barricade, you need to enter the console mode to reset t

-2- Table of Contents Chapter 1 Introduction...4 1.1 Functions and Fe

-29- Appendix B: TCP/IP Configuration for Windows 95/98 This section will show you how to install the TCP/IP protocol into your personal computer.

-30- 5. Select the Microsoft item in the manufacturers list. And choose TCP/IP in the Network Protocols. Click the OK button to return to the Network

-31- 2. Double click the Network icon. Select the TCP/IP line that has been assigned to your network card in the Configuration tab of the Network win

-32- a. Select Obtain an IP address automatically in the IP Address tab.

-33- b. Do not input any values in the Gateway tab.

-34- c. Choose Disable DNS in the DNS Configuration tab.

-35- B. Configure the IP manually a. Select Specify an IP address in the IP Address tab. The default IP address of the Barricade is 192.168.123.254,

-36- b. In the Gateway tab, add the IP address of the Barricade (default IP is 192.168.123.254) in the New gateway field and click the Add button.

-37- c. In the DNS Configuration tab, add the DNS values which are provided by the ISP into DNS Server Search Order field and click Add button. Tha

-38- Appendix C: Installation Guide For Specific ISP The WAN types provided by Barricade will cover almost all types of ISP services. Some ISPs, how

-3- 5.4 Configuring on Unix based Platforms ...27 Appendix A: Console Mode...

-39- C.2 MediaOne 1. Be sure you have a computer that is already set up to access MediaOne and that the MAC address of the Ethernet adapter used in t

-4- Chapter 1 Introduction Congratulations on your purchase of the Barricade. The Barricade is specifically designed for small office and home offic

-5- l Web-based configuring - configurable through any networked computer’s web browser using Netscape or Internet Explorer. l Access Control suppo

-6- Chapter 2 Hardware Installation 2.1 Panel Layout 2.1.1. Front Panel All LED indicators and RJ-45 connectors are allocated to the front panel.

-7- COL Collision indication Orange On Transmission collisions have occurred on the LAN LOOP Loop indication Orange On Loop connection has been detec

-8- guidelines: l Place product on a flat horizontal plane. l Keep product away from any heating devices. l Do not place product in a dusty or wet