SMC Networks ADSL2 Bedienungsanleitung PDF herunterladen (Seite 8)

2 Hardware Installation

Step 1 Connect the Line interface of the device and the Modem interface of the splitter through a telephone cable.

Connect the phone to the Phone interface of the splitter through a cable. Connect the incoming line to the

Line interface of the splitter.

The splitter has three interfaces:

– Line: Connect to a wall phone jack (RJ-11 jack)

– Modem: Connect to the ADSL jack of the device

– Phone: Connect to a telephone set.

Step 2 Connect the LAN interface of the device to the network card of the PC through an Ethernet cable

(MDI/MDIX).

Note:

Use twisted-pair cables to connect with the hub or switch.

Step 3 Plug one end of the power adapter to the wall outlet and connect the other end to the PWR

interface of the

device.

Connection 1

Figure 1 displays the application diagram for the connection of the router, PC, splitter and the telephone sets, when

no telephone set is placed before the splitter.

Figure 1 Connection Diagram (without connecting telephone sets before the splitter)

Connection 2

Figure 2 displays the application diagram for the connection of the router, PC, splitter and the telephone sets, when

a telephone set is placed before the splitter.

5

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 71 72

Keine Kommentare

SMC Networks ADSL2 Bedienungsanleitung Seite 8