SMC Networks ADSL2 Bedienungsanleitung PDF herunterladen (Seite 30)

The following table describes the parameters and buttons of this page.

Field Description

SSID Type Select the SSID.

Encryption

You can choose None, WEP, WPA (TKIP), WPA2 (AES), or WPA2 Mixed.

Wired equivalent privacy (WEP) entrypts data frames before transmitting over

the wireless network.

Wi-Fi protected access (WPE) is a subset of the IEEE802.11i security

specification draft. Key differences between WPA and WEP are user

authentication and improved data encryption.

Set WEP Key

It is available when you set to WEP. Click it, the Wireless Wep Key Setup page

appears.

Authentication RADIUS

Server

RADIUS is based on a client-server model that supports authentication,

authorization and accounting. The access point is client and the server is

RADIUS server. RADIUS is a simple package exchange in which your router

acts as a message relay between the wireless station and the network RADIUS

server.

Port

The default port of the RADIUS server for authentication is 1812. You need not

change this value unless your network administrator instructs you to do so with

additional information.

IP Address Enter the IP address of the RADIUS server.

Password

Enter a password as the key to be shared between the external authentication

server and the access point. The key is not send over the network. This key must

be the same on the external authentication server and your router.

Apply Changes Save the the changes of this page.

Click Set WEP Key, the page shown in the following figure appears.

27

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

Keine Kommentare

SMC Networks ADSL2 Bedienungsanleitung Seite 30