SMC Networks SMC7404BRA Bedienungsanleitung PDF herunterladen (Seite 21)

NSTALLATION

2-6

Connect the ADSL Line

Run standard telephone cable from the wall jack providing ADSL service

to the WAN port on your Barricade. When inserting an ADSL RJ-11 plug,

be sure the tab on the plug clicks into position to ensure that it is properly

seated. If you are using splitterless ADSL service, be sure you add low-pass

filters between the ADSL wall jack and your telephones. (These filters pass

voice signals through but filter data signals out.)

Phone Line Configuration

Installing a Full-rate Connection

If you are using a full-rate (G.dmt) connection, your service provider will

attach the outside ADSL line to a data/voice splitter. In this case you can

connect your phones and computer directly to the splitter as shown below:

Figure 2-1. Installing With a Splitter

Voice

Data

Residential

Connection

Point (NID)

Plain Old

Telephone

System (POTS)

Ethernet

hub or switch

ADSL Router

Splitter

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 129 130

Keine Kommentare

SMC Networks SMC7404BRA Bedienungsanleitung Seite 21