SMC Networks SMC7401BRA Bedienungsanleitung PDF herunterladen (Seite 82)

ONFIGURING

LIENT

TCP/IP

4-14

3. Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify

that your IP address is now 192.168.1.xxx, your Subnet Mask is

255.255.255.0 and your Default Gateway is 192.168.1.1. These values

confirm that your Barricade is functioning.

4. Type “EXIT” and press <ENTER> to close the “Command Prompt”

window.

Your computer is now configured to connect to the Barricade.

Configuring Your Macintosh Computer

You may find that the instructions here do not exactly match your screen.

This is because these steps and screenshots were created using Mac OS

8.5. Mac OS 7.x and above are all similar, but may not be identical to Mac

OS 8.5.

Step 1. Configure TCP/IP Settings

After completing hardware setup by connecting your network devices, you

need to configure your computer to connect to the Barricade. First

determine how your ISP issues your IP address. Many ISPs issue these

numbers automatically using Dynamic Host Configuration Protocol

(DHCP). Other ISPs provide a static IP address and associated numbers,

which you must enter manually. How your ISP assigns your IP address

determines how you need to configure your computer.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 108 109

Keine Kommentare

SMC Networks SMC7401BRA Bedienungsanleitung Seite 82