SMC Networks SMCBR24Q Bedienungsanleitung PDF herunterladen (Seite 81)

SMCBR24Q User Manual

Page 81

Rate Control

Interface: Check the WAN interface box, and the Rate Control Rule will apply to the selected interface (s).

Service: Select the Service from the drop-down menu. If the Service you need to control is not in the drop

down menu list, please click Service Management to add the Service.

IP: Enter the IP Address or IP range you need to control. The default is zero which includes all internal IP

addresses.

Direction: Select Upstream for outbound traffic or Downstream for inbound traffic from the drop-down

menu.

Min.

Rate (Kbit/sec): Enter the Mini. Rate for guaranteeing bandwidth.

Max. Rate (Kbit/sec): Enter the Max Rate for limiting bandwidth.

Enable: Check the box and push the Q-button on to enable this Rate Control Rule.

Add to list: After set up the rule, click the Add to list button. The max entry is 30.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 93 94

Keine Kommentare

SMC Networks SMCBR24Q Bedienungsanleitung Seite 81