SMC Networks SMC9432BTX Bedienungsanleitung PDF herunterladen (Seite 17)

1-7

INSTALLING THE NETWORK CARD

Inserting the Network Card

1. Switch off all computer system components, unplug the com-

puter, and remove the computer cover.

2. Work in a static-free area and touch the computer chassis often

to equalize static charges.

3. Install the network card into an available bus-mastering PCI slot.

4. Make sure the network card is completely seated so that no

“gold fingers” are exposed.

Figure 1-3. Inserting the Network Card

5. For the SMC9432TX/MP and SMC9432FTX, connect one

end of the 3-pin WOL cable to J1 on the card, and the

other end to the “5V Standby” connector on the computer’s

motherboard, as shown in Figure 1-3. (Refer to your

computer’s installation manual to locate the 5V Standby

connector.)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

Keine Kommentare

SMC Networks SMC9432BTX Bedienungsanleitung Seite 17