SMC Networks SMC7904BRB2 Bedienungsanleitung PDF herunterladen (Seite 64)

ONFIGURING

THE

ARRICADE

4-26

PPPoE

Parameter Description

VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual Circuit

Identifier (VCI) supplied by your ISP.

Encapsulation Select the encapsulation used by ISP from the drop-down

menu.

QoS Class ATM QoS classes including CBR, UBR and VBR

PCR/SCR/MBS QoS Parameters - PCR, SCR and MBS are configurable.

IP assigned by ISP Select yes, if your ISP assigns IP address dynamically.

IP Address If you have selected “No” in the previous field, type in

the IP address provided by your ISP.

Subnet Mask Enter the subnet mask address provided by your ISP.

Connect Type Sets connection mode to Always connected,

Auto-Triggered by traffic or Manual connection. For flat

rate services use Always connected.

Idle Time

(Minute)

Enter the maximum idle time for the Internet

connection. After this time has been exceeded the

connection will be terminated. This setting only applies

when the Connect Type is set to Auto-Triggered by

traffic.

Username Enter user name.

Password Enter password.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 125 126

Keine Kommentare

SMC Networks SMC7904BRB2 Bedienungsanleitung Seite 64