SMC Networks SMC6724AL2 Bedienungsanleitung PDF herunterladen (Seite 41)

ONNECTING

THE

ONSOLE

ORT

3-9

Connecting to the Console Port

The DB-9 serial port on the switch’s front panel is used to connect to the

switch for out-of-band console configuration. The on-board menu-driven

configuration program can be accessed from a terminal or a PC running a

terminal emulation program. The pin assignments used to connect to the

serial port are provided in the following tables.

Figure 3-7. Serial Port (DB-9 DTE) Pin-Out

Wiring Map for Serial Cable

Table 3-1. Serial Cable Wiring

The serial port’s configuration requirements are as follows:

• Default Baud rate—9,600 bps

• Character Size—8 Characters

•Parity—None

•Stop bit—One

• Data bits—8

Switch’s 9-Pin

Serial Port

Null Modem PC’s 9-Pin

DTE Port

2 RXD (receive data)

<----------------------------

3 TXD (transmit data)

------------------------- ---->

2 RXD (receive data)

5 SGND (signal ground)

------------------------- -----

5 SGND (signal ground)

No other pins are used.

6 9

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 77 78

Keine Kommentare

SMC Networks SMC6724AL2 Bedienungsanleitung Seite 41