SMC Networks SMC108DT Bedienungsanleitung PDF herunterladen (Seite 15)

TROUBLESHOOTING

SSyymmppttoomm

Power LED does not light after power on

Probable cause

Power outlet or power cord may be defective

Possible Solutions

. Check for loose connections.

. Check the power outlet by using it for another device.

. Replace the power cord.

SSyymmppttoomm

Link LED does not light after connection is made.

Probable Causes

Switch port, network card or cable may be defective.

Possible Solutions

. Check that the switch and attached device are both powered

on.

. Be sure the network cable is connected to both devices

. Verify that Category 5 cable is used for 100Mbps connections

and that the length of any cable does not exceed 100 meters

(328 feet). Check the network card and cable connections for

defects.

. Replace the defective card or cable if necessary.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

SMC Networks SMC108DT Bedienungsanleitung Seite 15