Smc-networks TIGERSWITCH 10/100 Bedienungsanleitung PDF herunterladen (Seite 144)

OMMAND

INE

NTERFACE

3-2

2. Enter the necessary commands to complete your desired tasks.

3. When finished, exit the session with the “quit” or “exit”

command.

After connecting to the system through the console port, the login

screen displays:

Telnet Connection

Telnet operates over the IP transport protocol. In this environment,

your management station and any network device you want to

manage over the network must have a valid IP address. Valid IP

addresses consist of four numbers, 0 to 255, separated by periods.

Each address consists of a network portion and host portion. For

example, the IP address assigned to this switch, 10.1.0.1, consists

of a network portion (10.1.0) and a host portion (1).

Note: The IP address for this switch is unassigned by default.

To access the switch through a Telnet session, you must first set

the IP address for the switch, and set the default gateway if you

are managing the switch from a different IP subnet. For example,

User Access Verification

Username: admin

Password:

CLI session with the TigerSwitch 10/100 -

6724L2 Managed 24+2 Standalone Switch is opened.

To end the CLI session, enter [Exit].

Console#

Console(config)#interface vlan 1

Console(config-if)#ip address 10.1.0.1 255.255.255.0

Console(config-if)#exit

Console(config)#ip default-gateway 10.1.0.254

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 317 318

Keine Kommentare

Smc-networks TIGERSWITCH 10/100 Bedienungsanleitung Seite 144