Smc-networks SMCWHSG44-G Bedienungsanleitung Seite 30
- Seite / 100
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
1.8.3.2. Router with a DHCP-Based DSL/Cable Connection
Fig. 13. TCP/IP settings for Router with a DHCP-Based
DSL/Cable Connection mode.
If the SMCWHSG44-G is set to be in 'Router with a DHCP-Based DSL/Cable
Connection 'mode, two IP addresses are needed-one for the Ethernet LAN
interface and the other for the WAN interface. The LAN IP address must be
set manually to a private IP address, say 192.168.2.xxx. The default LAN IP
address is 192.168.2.1 and the default subnet mask is 255.255.255.0. In
most cases, these default settings need no change.
As for the WAN IP address, it is obtained by DHCP from the ISP. The Trigger
mode setting affects the behavior of the DHCP client of the Router. In Auto
mode, you don't have to worry about the DHCP process; the device takes
care of everything. In Manual mode, there are two buttons on the Start page
for you to manually release an obtained IP address (Release) and re-obtain a
new one from a DHCP server (Renew).
1.8.3.3. Router with a Static-IP DSL/Cable Connection
Fig. 14. TCP/IP settings for Router with a Static-IP
DSL/Cable Connection mode.
If the SMCWHSG44-G is set to be in 'Router with a Static-IP DSL/Cable
Connection' mode, two IP addresses are needed-one for the Ethernet LAN
interface and the other for the WAN interface. The LAN IP address must be
set manually to a private IP address, say 192.168.2.xxx. The default LAN IP
29
- SMCWHSG44-G 1
- Safety Compliance 8
- Table of Contents 14
- 1. Introduction 18
- 1.1. Overview 19
- 1.2. Features 19
- 1.2.1 Package Checklist 23
- 1.3. LED Definition 23
- 1.4. Rear Panel 23
- 1.8.1. Entering the Password 27
- 1.8.6.1. Web Redirection 33
- 1.8.6.4. IEEE 802.1x 37
- 2.1. Overview 43
- 2.1.1. Menu Structure 43
- 2.2. Status 45
- 2.2.2. Authenticated Users 46
- 2.2.3. Account Table 46
- 2.2.4. Session List 47
- 2.2.5. Managed LAN Devices 47
- 2.3. SYSTEM 48
- 2.3.2. Changing Password 49
- 2.3.3. Managing Firmware 49
- 2.3.4. Time Zone 54
- 2.4.1. Address 54
- 2.4.2. DNS 57
- 2.4.2.1. DNS Proxy 57
- 2.4.3. NAT 58
- 2.4.3.1. Basic 58
- 2.4.4. DHCP Server 59
- 2.4.4.1. DHCP Server 60
- 2.4.4.2. DHCP Relay 61
- 2.4.5. Load Balancing 61
- 2.5.1. Wireless 62
- 2.5.1.1. Basic 62
- 2.5.2. Security 65
- 2.5.2.1. Basic 65
- 2.5.3. IEEE 802.1x/RADIUS 68
- 2.6.1. AAA 71
- 2.6.1.1. Basic 71
- 2.6.1.2. Unrestricted Clients 73
- 2.6.1.3. Walled Garden 74
- 2.6.2. RADIUS 74
- 2.6.2.1. Basic 74
- 2.6.2.2. Robustness 75
- Authentication Failure Pages 76
- 2.7. DDNS 78
- 2.8.1. Filters and Firewall 79
- 2.8.1.1. Packet Filters 79
- 2.8.1.2. VLAN 80
- 2.8.1.3. Firewall 80
- 2.8.1.4. URL Filters 81
- 2.8.2. Management 81
- 2.8.2.1. Basic 81
- 2.8.2.2. UPnP 82
- 2.8.2.3. System Log 82
- 2.8.2.4. SNMP 83
- 2.8.3. Access Rules 83
- 2.8.4. LAN Device Management 84
- Appendix A 86
- A-2: LED Definitions 87
- Appendix B: Troubleshooting 87
- B-1: TCP/IP Setting Problems 88
- B-3: Other Problems 90
- D-1: SMCWHSG44-G 92
- D-2: SMCWHS-POS 93
- D-3: Keypad 93
- Glossary 94
- FOR TECHNICAL SUPPORT, CALL: 100
Verwandte Produkte und Handbücher für Hardware Smc-networks SMCWHSG44-G
(2 Seiten)
(78 Seiten)
(2 Seiten)Thermador POD301J manuali
Manuali dei proprietari e guide per l'utente per Microonde Thermador POD301J.
We fornisce 1 manuali pdf Thermador POD301J per scaricare gratuitamente in base al tipo di documento: Manuale di Installazione
Kommentare zu diesen Handbüchern