Smc-networks SMC7904BRA Bedienungsanleitung PDF herunterladen (Seite 50)

ETUP

IZARD

4-5

Parameters Setting

Select your Country and Internet Service Provider. This will automatically

configure the Barricade ADSL Router with the correct Protocol,

Encapsulation type and VPI/VCI settings for your ISP.

If your Country or Internet Service Provider is not listed you will need to

manually enter settings. Go to “Parameter Setting - Country or ISP Not

Listed” on page 4-8 in the manual.

If your ISP uses PPPoA or PPPoE, then you will need to enter the user

name, password and DNS Server address supplied by your ISP.

If your ISP uses 1483 Routing, then you will need to enter the IP address,

Subnet Mask, Default Gateway and DNS Server address supplied by your

ISP.

Note: By default 192.168.2.1 is set for the DNS Server address, this

needs to be changed to reflect your ISP’s DNS Server address.

Click “NEXT” to continue.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 128 129

Keine Kommentare

Smc-networks SMC7904BRA Bedienungsanleitung Seite 50