Smc-networks TigerStack 100 1000BASE-X Bedienungsanleitung PDF herunterladen (Seite 56)

SING

THE

YSTEM

ONFIGURATION

ROGRAM

2-38

Note: Fast Forwarding enables end-node workstations and servers to

overcome time-out problems when the Spanning Tree Algorithm

is implemented in a network. Therefore, Fast Forwarding should

only be enabled for ports connected to an end-node device.

(Path) Cost 100/19/4 This parameter is used by the STA algorithm to

determine the best path between devices. Therefore,

lower values should be assigned to ports attached to

faster media, and higher values assigned to ports with

slower media.

(Path cost takes precedence over port priority.)

The default and recommended range is:

Ethernet: 100 (50~600)

Fast Ethernet: 19 (10~60)

Gigabit Ethernet: 4 (3~10)

The full range is 1 - 65535.

Fast

Forwarding

Enabled This parameter is used to enable/disabled the Fast

Spanning Tree mode for the selected port. In this

mode, ports skip the Blocked, Listening and Learning

states and proceed straight to Forwarding.

Parameter Default Description

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 177 178

Keine Kommentare

Smc-networks TigerStack 100 1000BASE-X Bedienungsanleitung Seite 56