Smc-networks SMC TigerStack II SMC6624M Bedienungsanleitung PDF herunterladen (Seite 161)

8-3

Configuring for Network Management Applications

Configuring for SNMP Access to the Switch

Monitoring and Managing

the Switch

The switch SNMP agent also uses certain variables that are included in an

SMC proprietary MIB file you can add to the SNMP database in your

network management tool.

Configuring for SNMP Access to the

Switch

SNMP access requires an IP address and subnet mask configured on the

switch. (See “IP Configuration” on page 5-2.) If you are using DHCP/Bootp to

configure the switch, ensure that the DHCP/Bootp process provides the IP

address. (See “DHCP/Bootp Operation” on page 5-10.)

Once an IP address has been configured, the general steps to configuring for

SNMP access to the preceding features are:

1. From the Main menu, select

2. Switch Configuration . . .

6. SNMP Community Names

2. Configure the appropriate SNMP communities. (The “public” community

exists by default and is used by network management applications.) (For

more on configuring SNMP communities, see “Menu: Viewing and Config-

uring SNMP Communities” on page 8-5.)

3. Configure the appropriate trap receivers. (For more on configuring trap

receivers, see “CLI: Configuring and Displaying Trap Receivers” on page

8-10.)

In some networks, authorized IP manager addresses are not used. In this case,

all management stations using the correct community name may access the

switch with the View and Access levels that have been set for that community.

If you want to restrict access to one or more specific nodes, you can use the

switch’s IP Authorized Manager feature. (See “Using IP Authorized Managers”

on page 7-28.)

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 363 364

Keine Kommentare

Smc-networks SMC TigerStack II SMC6624M Bedienungsanleitung Seite 161