Smc-networks SMC-EZ108FDT Bedienungsanleitung PDF herunterladen (Seite 14)

Installing the Switch

Connecting to a Fiber Optic Port

If you connect fiber cable to a 100Mbps module on the switch, be sure you use an

SC-type or ST or MTRJ connector. When inserting the cable, be sure the tab on the

plug clicks into position to ensure that it is properly seated. If you use an SC-to-ST

converter (for 62.5/125 micron cable only), run cable from the Rx (Tx) port on the

module to the Tx (Rx) port on the target device. The fiber module operates at

100Mbps, Full duplex, and supports flow control. The maximum cable length for

100BASE-FX fiber is as shown in the following table.

Fiber

Transceiver

Optical

Wavelength

Maximum

Cable Length

Multimode 1310 nm 2km (1.24 miles)

Single-mode 1310 nm 20 km (12.43 miles)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Smc-networks SMC-EZ108FDT Bedienungsanleitung Seite 14