SMC Networks SMC7004VWBR Bedienungsanleitung PDF herunterladen (Seite 74)

Troubleshooting

D. The 10/100 LED does not light after a connection is made.

1. Check that the host computer and hub are both powered on.

2. Be sure the network cable is connected to both devices.

3. Verify that Category 5 cable is used if you are operating at

100 Mbps, and that the length of any cable does not exceed

100 m (328 ft).

4. Check the network card connections.

5. The 10BASE-T/100BASE-TX hub/switch port, network card,

or cable may be defective.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 80 81 82

Keine Kommentare

SMC Networks SMC7004VWBR Bedienungsanleitung Seite 74